Volkswagen GOLF IV 4WD COILOVER KIT SPORT
Volkswagen GOLF IV 4WD COILOVER KIT SPORT
1.052,76€
Χωρίς ΦΠΑ: 849,00€
- Διαθεσιμότητα: Κατόπιν Παραγγελίας
- Κατασκευαστής: MTS Technik
- Κωδικός: MTS015445 MTSGWVW88-S
Group: Coilover kits
Make: VW
Model: GOLF
Engine: 1.8
Type: 1
Year: 08/97 - 12/04
PRODUCT DESCRIPTION
Coilover Kit Audi A3 8L
Coilover Kit MTS Technik for Audi A3 8L, lowering both axles between 25 - 50 mm. Dedicated for the years of: 09/96 - 09/06, for the engine version: 1.8T Quattro / S3 / 1.9TDI Quattro.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.CAR:
| Make | Audi |
| Model | A3 8L |
| Type | 8L1 |
| Engine | 1.8T Quattro / S3 / 1.9TDI Quattro |
| Year | 09/96 - 09/06 |
TECH SPECS:
| Series: | SPORT |
 Max. Axle Load FA: | -1110 kg |
| Max. Axle Load RA: | -1080 kg |
| Lowering FA: | 25 - 50 mm |
| Lowering RA: | 25 - 50 mm |
| Camber / top mount FA: | yes |
| Camber / top mount RA: | no |
| Coilover Main Spring (Front): | Spring rate (90 N/mm) |
| Coilover Helper Spring (Front): | Spring rate (20 N/mm) |
| Coilover Main Spring (Rear): | Spring rate (100 - 120 N/mm) |
| TUV Certificate: | no |
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
5 - Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.
6 - If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35 - Rear thread adjustment block is mounted on the top.
61 - Only for 4x4 models.
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
