VOLKSWAGEN GOLF IV (1J1) GOLD COILOVER KIT SPORT
VOLKSWAGEN GOLF IV (1J1) GOLD COILOVER KIT SPORT
700,00€
Χωρίς ΦΠΑ: 564,52€
- Διαθεσιμότητα: Παράδοση σε 1-3 ημέρες
- Κατασκευαστής: MTS Technik
- Κωδικός: MTSGWVW10-SKB
PRODUCT DESCRIPTION
Coilover Kit Volkswagen GOLF IV (1J1)
Coilover Kit MTS Technik for Volkswagen GOLF IV (1J1), lowering the front axle between 30 - 80 mm, and rear between 25 - 75 mm. Dedicated for the years of: 08/97 - 12/07, for the engine version: 1.4 16V / 1.6 / 1.6 16V / 1.6 FSI / 1.8 / 1.8 T / 1.8 T GTI / 1.9 SDI / 1.9 TD / 1.9 TDI / 2.0 / 2.3 V5.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.CAR:
| Make | Volkswagen |
| Model | GOLF IV (1J1) |
| Type | 1J1 |
| Engine | 1.4 16V / 1.6 / 1.6 16V / 1.6 FSI / 1.8 / 1.8 T / 1.8 T GTI / 1.9 SDI / 1.9 TD / 1.9 TDI / 2.0 / 2.3 V5 |
| Year | 08/97 - 12/07 |
TECH SPECS:
| Series: | sport |
| Housing: | gold |
 Max. Axle Load FA: | -1020 kg |
| Max. Axle Load RA: | -1020 kg |
| Lowering FA: | 30 - 80 mm |
| Lowering RA: | 25 - 75 mm |
| Camber / top mount FA: | no |
| Camber / top mount RA: | no |
| Coilover Main Spring (Front): | Spring rate (80 N/mm) |
| Coilover Helper Spring (Front): | Spring rate (20 N/mm) |
| Coilover Main Spring (Rear): | Spring rate (60 N/mm) |
| Coilover Helper Spring (Rear): | Spring rate (20 N/mm) |
| TUV Certificate: | yes |
| Download information brochure: | Download information brochure |
| Download TUV Certificate: | Download TUV Certificate |
| Download installation manual: | Download installation manual |
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
5 - Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.
6 - If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.
8 - Not for 4x4.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.