Gold Coilover Suspension Street AudiA3 (8V) 2012-2020

599,00€

Χωρίς ΦΠΑ: 483,06€

Διαθεσιμότητα: Εκτός Αποθέματος
Κωδικός: MTSGWVW53KB

Ποσότητα

ΚΑΛΑΘΙ

Buy Now Ask Question

MakeAudiModelA3 (8V)Type8V1, 8VKEngine1.8 TFSI quattro / 2.0 TDI quattro / 2.0 TFSI quattro / S3 quattroYear04/12 - 10/20

SeriesStreetHousinggoldMax. Axle Load FA1081 - 1180 kgMax. Axle Load RA-1110 kgLowering FA35 - 70 mmLowering RA35 - 70 mmCamber / top mount FAnoCamber / top mount RAnoCoilover Main Spring (Front)Spring rate (30 - 55 N/mm)Coilover Main Spring (Rear)Spring rate (80 N/mm)Coilover Helper Spring (Rear)Spring rate (20 N/mm)Infomultilink rear suspensionTUV CertificateyesDownload GPSR brochureDownload GPSR brochureDownload GPSR stickerDownload GPSR stickerDownload information brochureDownload information brochureDownload installation manualDownload installation manualDownload TUV CertificateDownload TUV Certificate

3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.35 - Rear thread adjustment block is mounted on the top.39 -

Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.

52 - Only suitable for multilink suspension.70 - Not for GTE.73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

Coilover Kit Audi A3 (8V)

Coilover Kit MTS Technik for Audi A3 (8V), lowering both axles between 35 - 70 mm. Dedicated for the years of: 04/12 - 10/20, for the engine version: 1.8 TFSI quattro / 2.0 TDI quattro / 2.0 TFSI quattro / S3 quattro.

2 year warranty with no mileage limit to confirm high quality.

Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

The use of twin-tube technology guarantees stable shock absorber performance.

Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.